This article goes through the RecMic II Configuration settings in the ODMS R7 Dictation Module.

  • Open the Dictation Module
  • Connect the Rec Mic
  • Click on Tools and then Options
  • Click on the Device tab
  • Ensure the recorder is recognised by checking the relevant RecMic II model is selected and the Model Name field should display the version and serial number.

 RecMic Configuration settings in Dictation Module 1

General Window

RecMic Configuration settings in Dictation Module 2

Recording

This feature is only available with the RecMic II and not the previous RecMic generation.

RecMic Configuration settings in Dictation Module 4

The Recording window lets you configure the microphone settings such as the Recording scene mode and the Microphone motion control.

The Recording Scene mode adjusts the microphone directionality, noise cancellation and gain control depending on the recording environment.

To change the Recording Scene mode, click on the current settings drop down and select from the list.

RecMic Configuration settings in Dictation Module 5

Enable automatic mute mode will mute the microphone when the RecMic is placed down and will unmute when the RecMic is picked up.

Enable hands-free recording mode will allow you to record while the RecMic is placed in the cradle. 

Application Control

RecMic Configuration settings in Dictation Module 6

The Application Control Window allows you to further configure the RecMic to control additional functions of the software.

To configure a button follow the steps below.

  • Click on the "..." button within the Assign field.
  • Select a Category from the drop down
    • Direct Recording
    • Playback Control
    • General (Launch or close the Dictation Module)
    • Voice Recognition (Real-Time Voice Recognition Editor Window)
    • Dragon User Commands (Use custom created Dragon User Commands)

RecMic Configuration settings in Dictation Module 7

  • Select a Command

    RecMic Configuration settings in Dictation Module 8

  • Click OK